For calibration, I set the Velodyne (which I'm pretty confident doesn't have LFE direct input but correct me if I'm wrong please) to phase 0, turned the LPF to 120 which is the highest and then ran the calibration using the Marantz's Mult EQ. While the distances were shown accurately, the speaker sizes and crossover frequencies(?) were set to Auto. In other words, I don't know if the speakers are set to small and at what frequency the sound is being sent to the sub (I do get sound out of the sub). Is it safe to assume that the speakers (Celestion A1, if it matters) are set to 'small' and the frequencies are 'correct'? It seems I'm unable to change the sizes and frequencies of the results found by the Mult EQ on the Marantz. Your help is very much appreciated.